Steel Section Weight Calculator
Calculate weight per meter, total weight, and paint surface area for I-beams, angles, channels, round tubes, square tubes, and flat bars.
Profile & Dimensions
Weight Results
Weight per Meter
21.53kg/m
Total Weight (1 pcs × 6m)
129.20kg
Cross-Section Area
2743mm²
Surface per Meter
1.1546m²/m
Total Surface Area
6.933m²
Cross-Section Preview
Scale: 1 unit = 1 mm (not to scale)
Recommended Engineering & CAD Utilities
Handpicked companion tools to streamline modeling, calculation, and drafting workflows
Standard Steel Section Properties Reference (IPE/HEA/HEB/UB/UC)
ShortcutsEuropean (IPE, HEA, HEB, UPE) and British (UB, UC) steel section properties: dimensions, area, weight, moment of inertia, and section modulus.
Steel Section Weight Calculator
CalculatorCalculate weight of steel sections (I-beam, channel, angle, tube) from dimensions.
Pipe Schedule & Dimensions Reference Table (NPS, DN, Sch 10-160)
ShortcutsComplete pipe schedule reference with NPS, DN, OD, wall thickness, inside diameter, and weight for steel, stainless, and PVC pipes.
ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table
ShortcutsStandard deformed concrete rebar sizes (#3 to #18): nominal diameter (in / mm), cross-sectional area, unit weight, and metric soft equivalent.
Steel Section Properties Reference Table (I-Beam, Channel, Angle, Tube)
ShortcutsInteractive lookup for standard steel section dimensions, area, moment of inertia, section modulus, and radius of gyration.
Revit Worksharing Conflict Resolver
CoordinationResolve central model sync locks, element ownership borrow permissions, and slow worksets.
Engineering Methodology & Design Standards: Steel Section Weight Calculator
Discipline: Structural Steel, Beam Mechanics & Welding Engineering
Governing Mathematical Formulation
In professional Structural Steel, Beam Mechanics & Welding Engineering workflows, accurate sizing and performance verification require consistent unit normalization and adherence to closed-form analytical mechanics. This Steel Section Weight Calculator utility implements the standardized engineering formulation:
W_linear = A_cross_section × ρ_material • TotalMass = W_linear × Length × Quantity (EN 10025 / ASTM A6)Calculate per-meter weight, total weight, and paint surface area for steel I-beams, angles, channels, tubes, and flat bars. Every input change triggers an instant client-side recalculation across all coupled dependent variables, enabling rapid sensitivity analysis during preliminary and detailed CAD design phases.
Applicable Codes, Standards & CAD Integration
Confirm that member end-connection rotational stiffness (pinned, semi-rigid, or fixed moment connections) modeled in your structural BIM/CAD framing plan matches the effective length factor (K) assumed in calculation.
Engineering Verification Note: Analytical models assume homogeneous material behavior, steady-state boundary loading, and consistent dimensional units. Always apply appropriate service factors, corrosion allowances, or load and resistance factor design (LRFD / ASD) safety margins required by your governing code.
Parameter Specifications & Worked Engineering Example
Baseline reference case using default design values for Steel Section Weight Calculator
Step-by-Step Benchmark Walkthrough
- Define Design Boundary Conditions: Establish the nominal operating parameters for the component or system:
Flange Width B (mm) = 100, Web Thickness tw (mm) = 5.7, Flange Thickness tf (mm) = 8.5, Length (m) = 6, Quantity = 1. Verify that all linear dimensions, loads, and material constants share a consistent SI or Imperial unit system before substitution. - Execute Analytical Formulation: Substitute the normalized input vector into the governing relation (
W_linear = A_cross_section × ρ_material • TotalMass = W_linear × Length × Quantity (EN 10025 / ASTM A6)) in accordance with AISC 360-22 (Specification for Structural Steel Buildings), Eurocode 3 (EN 1993-1-1 & EN 1993-1-8), AWS D1.1 / ISO 5817 (Structural Welding Code), ASME B30. - Verify Computed Engineering Outputs: For the baseline design case, the calculator yields
Weight per Meter = 21.53 kg/m; Cross-Section Area = 2743 mm²; Surface per Meter = 1.1546 m²/m; Total Surface Area = 6.933 m². Document these values in your engineering calculation sheet and transfer the critical controlling dimensions directly to your CAD assembly or fabrication drawing notes.
Frequently Asked Engineering Questions
Technical reference & verification guidelines for Steel Section Weight Calculator
What governing equation and methodology does the Steel Section Weight Calculator use?
The Steel Section Weight Calculator evaluates calculate per-meter weight, total weight, and paint surface area for steel i-beams, angles, channels, tubes, and flat bars within the Structural Steel, Beam Mechanics & Welding Engineering domain using the governing formulation: W_linear = A_cross_section × ρ_material • TotalMass = W_linear × Length × Quantity (EN 10025 / ASTM A6). All intermediate quantities are computed in double-precision floating-point arithmetic to prevent cumulative rounding drift before final design verification.
Which international engineering standards apply to Steel Section Weight Calculator calculations?
Calculations and boundary assumptions in this utility align with recognized industry references including AISC 360-22 (Specification for Structural Steel Buildings), Eurocode 3 (EN 1993-1-1 & EN 1993-1-8), AWS D1.1 / ISO 5817 (Structural Welding Code), ASME B30. When preparing formal calculation packages or P.E. stamp submittals, always verify local jurisdictional code amendments and project-specific safety factors.
How should I integrate results from the Steel Section Weight Calculator into my CAD or BIM workflow?
Confirm that member end-connection rotational stiffness (pinned, semi-rigid, or fixed moment connections) modeled in your structural BIM/CAD framing plan matches the effective length factor (K) assumed in calculation. Using the baseline benchmark (Flange Width B (mm) = 100, Web Thickness tw (mm) = 5.7, Flange Thickness tf (mm) = 8.5, Length (m) = 6, Quantity = 1), the solver yields Weight per Meter = 21.53 kg/m; Cross-Section Area = 2743 mm²; Surface per Meter = 1.1546 m²/m; Total Surface Area = 6.933 m², which can be directly cross-referenced against your parametric 3D assembly constraints, 2D fabrication drawings, or bill of materials (BOM).