ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table
Standard deformed concrete rebar sizes (#3 to #18): nominal diameter (in / mm), cross-sectional area, unit weight, and metric soft equivalent.
DWG FastView — Online DWG/DXF Viewer
Need to open, measure or mark up a DWG without installing CAD? DWG FastView runs in the browser. This is a sponsored placement and has no effect on the results of the tool above.
Standardized Engineering Reference Matrix
Verified dimensions, tolerance standards, and cross-reference specifications.
| Rebar Designation | Nominal Diameter (mm / in) | Cross-Section Area (mm² / in²) | Nominal Mass (kg/m / lb/ft) | Metric Soft Equivalent | Action |
|---|---|---|---|---|---|
| #3 | 9.525 mm (0.375") | 71 mm² (0.11 in²) | 0.560 kg/m (0.376 lb/ft) | #10M | |
| #4 | 12.700 mm (0.500") | 129 mm² (0.20 in²) | 0.994 kg/m (0.668 lb/ft) | #13M | |
| #5 | 15.875 mm (0.625") | 200 mm² (0.31 in²) | 1.552 kg/m (1.043 lb/ft) | #16M | |
| #6 | 19.050 mm (0.750") | 284 mm² (0.44 in²) | 2.235 kg/m (1.502 lb/ft) | #19M | |
| #7 | 22.225 mm (0.875") | 387 mm² (0.60 in²) | 3.042 kg/m (2.044 lb/ft) | #22M | |
| #8 | 25.400 mm (1.000") | 510 mm² (0.79 in²) | 3.973 kg/m (2.670 lb/ft) | #25M | |
| #9 | 28.650 mm (1.128") | 645 mm² (1.00 in²) | 5.060 kg/m (3.400 lb/ft) | #29M | |
| #10 | 32.260 mm (1.270") | 819 mm² (1.27 in²) | 6.404 kg/m (4.303 lb/ft) | #32M | |
| #11 | 35.810 mm (1.410") | 1006 mm² (1.56 in²) | 7.907 kg/m (5.313 lb/ft) | #36M | |
| #14 | 43.000 mm (1.693") | 1452 mm² (2.25 in²) | 11.384 kg/m (7.650 lb/ft) | #43M | |
| #18 | 57.330 mm (2.257") | 2581 mm² (4.00 in²) | 20.238 kg/m (13.600 lb/ft) | #57M |
Next Steps in Your BIM & AEC Workflow
Essential IFC exporters, family optimizers, and coordination tools for architects & engineers
ANSI / ASME B1.1 Unified Inch Screw Threads (UNC / UNF) Database
Standard dimensions for Unified inch fasteners: major diameter, TPI, pitch diameter, minor diameter, and recommended tap drill sizes.
CNC Cutting Tool Specifications Quick Reference
Standard CNC tool sizes, geometries, and applications: end mills, drills, taps, reamers, and inserts for milling and turning.
CAD Drawing Limits & Grid boundary Calculator
Quickly set up grid limits for architectural plotting and standard paper sizes in model space.
Engineering Drawing Standards Comparison — ISO vs ASME vs DIN vs JIS
Side-by-side comparison of major engineering drawing standards: dimensioning rules, tolerancing, projection methods, and sheet sizes.
UNC/UNF Imperial Thread & Tap Drill Reference
Complete UNC (coarse) and UNF (fine) thread table: #0 through 1-1/2" with TPI, tap drill sizes, clearance holes, and thread engagement data.
Revit Family Parameter Calculator
Audit nested family formulas, flex geometry constraints, and streamline model performance.
Engineering Methodology & Design Standards: ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table
Discipline: Civil, Concrete & Architectural Building Engineering
Governing Mathematical Formulation
In professional Civil, Concrete & Architectural Building Engineering workflows, accurate sizing and performance verification require consistent unit normalization and adherence to closed-form analytical mechanics. This ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table utility implements the standardized engineering formulation:
Standard deformed concrete rebar sizes (#3 to #18): nominal diameter (in / mm), cross-sectional area, unit weight, and metric soft equivalent.Standard deformed concrete rebar sizes (#3 to #18): nominal diameter (in / mm), cross-sectional area, unit weight, and metric soft equivalent. Every input change triggers an instant client-side recalculation across all coupled dependent variables, enabling rapid sensitivity analysis during preliminary and detailed CAD design phases.
Applicable Codes, Standards & CAD Integration
Verify clear concrete cover, rebar lap splice lengths, and dimensional construction tolerances directly on your BIM sheets and shop drawings before issuing for site fabrication.
Engineering Verification Note: Analytical models assume homogeneous material behavior, steady-state boundary loading, and consistent dimensional units. Always apply appropriate service factors, corrosion allowances, or load and resistance factor design (LRFD / ASD) safety margins required by your governing code.
Parameter Specifications & Worked Engineering Example
Baseline reference case using default design values for ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table
Step-by-Step Benchmark Walkthrough
- Define Design Boundary Conditions: Establish the nominal operating parameters for the component or system:
Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = ACI 318-19 (Building Code Requirements for Structural Concrete). Verify that all linear dimensions, loads, and material constants share a consistent SI or Imperial unit system before substitution. - Execute Analytical Formulation: Substitute the normalized input vector into the governing relation (
Standard deformed concrete rebar sizes (#3 to #18): nominal diameter (in / mm), cross-sectional area, unit weight, and metric soft equivalent.) in accordance with ACI 318-19 (Building Code Requirements for Structural Concrete), Eurocode 2 (EN 1992-1-1), IBC 2024 / ASCE 7-22, ADA 2010 Standards for Accessible Design. - Verify Computed Engineering Outputs: For the baseline design case, the calculator yields
Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready. Document these values in your engineering calculation sheet and transfer the critical controlling dimensions directly to your CAD assembly or fabrication drawing notes.
Frequently Asked Engineering Questions
Technical reference & verification guidelines for ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table
What governing equation and methodology does the ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table use?
The ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table evaluates standard deformed concrete rebar sizes (#3 to #18): nominal diameter (in / mm), cross-sectional area, unit weight, and metric soft equivalent within the Civil, Concrete & Architectural Building Engineering domain using the governing formulation: Standard deformed concrete rebar sizes (#3 to #18): nominal diameter (in / mm), cross-sectional area, unit weight, and metric soft equivalent.. All intermediate quantities are computed in double-precision floating-point arithmetic to prevent cumulative rounding drift before final design verification.
Which international engineering standards apply to ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table calculations?
Calculations and boundary assumptions in this utility align with recognized industry references including ACI 318-19 (Building Code Requirements for Structural Concrete), Eurocode 2 (EN 1992-1-1), IBC 2024 / ASCE 7-22, ADA 2010 Standards for Accessible Design. When preparing formal calculation packages or P.E. stamp submittals, always verify local jurisdictional code amendments and project-specific safety factors.
How should I integrate results from the ASTM Standard Reinforcing Bar (Rebar) Sizes & Properties Reference Table into my CAD or BIM workflow?
Verify clear concrete cover, rebar lap splice lengths, and dimensional construction tolerances directly on your BIM sheets and shop drawings before issuing for site fabrication. Using the baseline benchmark (Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = ACI 318-19 (Building Code Requirements for Structural Concrete)), the solver yields Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready, which can be directly cross-referenced against your parametric 3D assembly constraints, 2D fabrication drawings, or bill of materials (BOM).