Standard Fasteners Specification Library
Searchable library of ISO, DIN, ANSI, and JIS fastener specifications: bolts, screws, nuts, washers, pins, and rivets.
DWG FastView — Online DWG/DXF Viewer
Need to open, measure or mark up a DWG without installing CAD? DWG FastView runs in the browser. This is a sponsored placement and has no effect on the results of the tool above.
Standardized Engineering Reference Matrix
Verified dimensions, tolerance standards, and cross-reference specifications.
| Thread Size | Pitch (mm) | Hex Bolt Across Flats s (mm) | Cap Screw Head Dia dk (mm) | Plain Washer ID / OD (mm) | Proof Load (Grade 8.8 kN) | Recommended Torque (Grade 8.8 Nm) | Action |
|---|---|---|---|---|---|---|---|
| M4 | 0.70 | 7.0 mm (DIN 933) | 7.0 mm (DIN 912) | 4.3 / 9.0 mm (ISO 7089) | 4.4 kN | 3.1 Nm | |
| M5 | 0.80 | 8.0 mm (DIN 933) | 8.5 mm (DIN 912) | 5.3 / 10.0 mm (ISO 7089) | 7.2 kN | 6.1 Nm | |
| M6 | 1.00 | 10.0 mm (DIN 933) | 10.0 mm (DIN 912) | 6.4 / 12.0 mm (ISO 7089) | 10.2 kN | 10.5 Nm | |
| M8 | 1.25 | 13.0 mm (DIN 933) | 13.0 mm (DIN 912) | 8.4 / 16.0 mm (ISO 7089) | 18.7 kN | 25.0 Nm | |
| M10 | 1.50 | 16.0 / 17.0 mm | 16.0 mm (DIN 912) | 10.5 / 20.0 mm (ISO 7089) | 29.7 kN | 51.0 Nm | |
| M12 | 1.75 | 18.0 / 19.0 mm | 18.0 mm (DIN 912) | 13.0 / 24.0 mm (ISO 7089) | 43.2 kN | 89.0 Nm | |
| M16 | 2.00 | 24.0 mm (DIN 933) | 24.0 mm (DIN 912) | 17.0 / 30.0 mm (ISO 7089) | 80.5 kN | 215.0 Nm | |
| M20 | 2.50 | 30.0 mm (DIN 933) | 30.0 mm (DIN 912) | 21.0 / 37.0 mm (ISO 7089) | 126.0 kN | 420.0 Nm |
Recommended Engineering & CAD Utilities
Handpicked companion tools to streamline modeling, calculation, and drafting workflows
ANSI / ASME B1.1 Unified Inch Screw Threads (UNC / UNF) Database
Standard dimensions for Unified inch fasteners: major diameter, TPI, pitch diameter, minor diameter, and recommended tap drill sizes.
Deep Groove Ball Bearings (6000, 6200, 6300 Series) Specification Library
Dimensions, basic dynamic load ratings (Cr), static ratings (C0r), and RPM limits for ISO metric radial ball bearings.
Bolt Tightening Torque & Preload Tension Calculator
Find required assembly torque, bolt preloads, and tightening standards for high-tensile fasteners.
CNC Cutting Tool Specifications Quick Reference
Standard CNC tool sizes, geometries, and applications: end mills, drills, taps, reamers, and inserts for milling and turning.
AISC Standard Steel Shapes Structural Properties Library
Comprehensive dimensional and structural property database for AISC wide-flange beams (W-Shapes), I-beams, channels, and angles.
Revit Worksharing Conflict Resolver
Resolve central model sync locks, element ownership borrow permissions, and slow worksets.
Engineering Methodology & Design Standards: Standard Fasteners Specification Library
Discipline: Fastener Engineering & Bolted Joint Mechanics
Governing Mathematical Formulation
In professional Fastener Engineering & Bolted Joint Mechanics workflows, accurate sizing and performance verification require consistent unit normalization and adherence to closed-form analytical mechanics. This Standard Fasteners Specification Library utility implements the standardized engineering formulation:
Searchable library of ISO, DIN, ANSI, and JIS fastener specifications: bolts, screws, nuts, washers, pins, and rivets.Searchable library of ISO, DIN, ANSI, and JIS fastener specifications: bolts, screws, nuts, washers, pins, and rivets. Every input change triggers an instant client-side recalculation across all coupled dependent variables, enabling rapid sensitivity analysis during preliminary and detailed CAD design phases.
Applicable Codes, Standards & CAD Integration
Ensure clearance hole diameters conform to ISO 273 / ASME B18.2.8 medium fit series and verify minimum thread engagement length (typically 1.0×d in steel, 2.0×d in aluminum) in your assembly BOM.
Engineering Verification Note: Analytical models assume homogeneous material behavior, steady-state boundary loading, and consistent dimensional units. Always apply appropriate service factors, corrosion allowances, or load and resistance factor design (LRFD / ASD) safety margins required by your governing code.
Parameter Specifications & Worked Engineering Example
Baseline reference case using default design values for Standard Fasteners Specification Library
Step-by-Step Benchmark Walkthrough
- Define Design Boundary Conditions: Establish the nominal operating parameters for the component or system:
Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = VDI 2230 (Systematic Calculation of High Duty Bolted Joints). Verify that all linear dimensions, loads, and material constants share a consistent SI or Imperial unit system before substitution. - Execute Analytical Formulation: Substitute the normalized input vector into the governing relation (
Searchable library of ISO, DIN, ANSI, and JIS fastener specifications: bolts, screws, nuts, washers, pins, and rivets.) in accordance with VDI 2230 (Systematic Calculation of High Duty Bolted Joints), ISO 898-1 (Mechanical Properties of Carbon & Alloy Steel Fasteners), ASME B1.1 / ISO 68-1. - Verify Computed Engineering Outputs: For the baseline design case, the calculator yields
Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready. Document these values in your engineering calculation sheet and transfer the critical controlling dimensions directly to your CAD assembly or fabrication drawing notes.
Frequently Asked Engineering Questions
Technical reference & verification guidelines for Standard Fasteners Specification Library
What governing equation and methodology does the Standard Fasteners Specification Library use?
The Standard Fasteners Specification Library evaluates searchable library of iso, din, ansi, and jis fastener specifications: bolts, screws, nuts, washers, pins, and rivets within the Fastener Engineering & Bolted Joint Mechanics domain using the governing formulation: Searchable library of ISO, DIN, ANSI, and JIS fastener specifications: bolts, screws, nuts, washers, pins, and rivets.. All intermediate quantities are computed in double-precision floating-point arithmetic to prevent cumulative rounding drift before final design verification.
Which international engineering standards apply to Standard Fasteners Specification Library calculations?
Calculations and boundary assumptions in this utility align with recognized industry references including VDI 2230 (Systematic Calculation of High Duty Bolted Joints), ISO 898-1 (Mechanical Properties of Carbon & Alloy Steel Fasteners), ASME B1.1 / ISO 68-1. When preparing formal calculation packages or P.E. stamp submittals, always verify local jurisdictional code amendments and project-specific safety factors.
How should I integrate results from the Standard Fasteners Specification Library into my CAD or BIM workflow?
Ensure clearance hole diameters conform to ISO 273 / ASME B18.2.8 medium fit series and verify minimum thread engagement length (typically 1.0×d in steel, 2.0×d in aluminum) in your assembly BOM. Using the baseline benchmark (Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = VDI 2230 (Systematic Calculation of High Duty Bolted Joints)), the solver yields Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready, which can be directly cross-referenced against your parametric 3D assembly constraints, 2D fabrication drawings, or bill of materials (BOM).