Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB)
Dimensional and geometric properties of European structural steel profiles: IPE beams, HEA/HEB wide-flange columns per EN 10034 / EN 10025.
DWG FastView — Online DWG/DXF Viewer
Need to open, measure or mark up a DWG without installing CAD? DWG FastView runs in the browser. This is a sponsored placement and has no effect on the results of the tool above.
Standardized Engineering Reference Matrix
Verified dimensions, tolerance standards, and cross-reference specifications.
| Eurocode Designation | Section Depth h (mm) | Flange Width b (mm) | Web Thick tw (mm) | Flange Thick tf (mm) | Cross-Section Area (cm²) | Section Modulus Wx (cm³) | Action |
|---|---|---|---|---|---|---|---|
| IPE 160 | 160 | 82 | 5.0 | 7.4 | 20.1 | 109 | |
| IPE 200 | 200 | 100 | 5.6 | 8.5 | 28.5 | 194 | |
| IPE 240 | 240 | 120 | 6.2 | 9.8 | 39.1 | 324 | |
| IPE 300 | 300 | 150 | 7.1 | 10.7 | 53.8 | 557 | |
| HEA 160 (IPBl) | 152 | 160 | 6.0 | 9.0 | 38.8 | 220 | |
| HEA 200 (IPBl) | 190 | 200 | 6.5 | 10.0 | 53.8 | 389 | |
| HEA 240 (IPBl) | 230 | 240 | 7.5 | 12.0 | 76.8 | 675 | |
| HEB 200 (IPB) | 200 | 200 | 9.0 | 15.0 | 78.1 | 570 | |
| HEB 240 (IPB) | 240 | 240 | 10.0 | 17.0 | 106.0 | 938 | |
| HEB 300 (IPB) | 300 | 300 | 11.0 | 19.0 | 149.0 | 1680 |
Recommended Engineering & CAD Utilities
Handpicked companion tools to streamline modeling, calculation, and drafting workflows
Standard Fasteners Specification Library
Searchable library of ISO, DIN, ANSI, and JIS fastener specifications: bolts, screws, nuts, washers, pins, and rivets.
2D Frame Structural Analysis Calculator
Analyze 2D frame structures for bending moments, shear forces, axial forces, and displacements using the stiffness method.
Embodied Carbon Calculator (A1-A3 Cradle-to-Gate) — Building Materials LCA
Calculate upfront embodied carbon (kgCO2e/m²) for structural concrete, steel, glass, and insulation per EN 15978 and RICS professional standards.
AISC Standard Steel Shapes Structural Properties Library
Comprehensive dimensional and structural property database for AISC wide-flange beams (W-Shapes), I-beams, channels, and angles.
Grinding Wheel Speed Calculator
Calculate grinding wheel surface speed, RPM, and MRR from wheel specs.
SolidWorks vs Fusion 360
Deep side-by-side comparison of parametric modeling, cloud PDM, CAM, and pricing in 2026.
Engineering Methodology & Design Standards: Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB)
Discipline: Structural Steel, Beam Mechanics & Welding Engineering
Governing Mathematical Formulation
In professional Structural Steel, Beam Mechanics & Welding Engineering workflows, accurate sizing and performance verification require consistent unit normalization and adherence to closed-form analytical mechanics. This Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB) utility implements the standardized engineering formulation:
Dimensional and geometric properties of European structural steel profiles: IPE beams, HEA/HEB wide-flange columns per EN 10034 / EN 10025.Dimensional and geometric properties of European structural steel profiles: IPE beams, HEA/HEB wide-flange columns per EN 10034 / EN 10025. Every input change triggers an instant client-side recalculation across all coupled dependent variables, enabling rapid sensitivity analysis during preliminary and detailed CAD design phases.
Applicable Codes, Standards & CAD Integration
Confirm that member end-connection rotational stiffness (pinned, semi-rigid, or fixed moment connections) modeled in your structural BIM/CAD framing plan matches the effective length factor (K) assumed in calculation.
Engineering Verification Note: Analytical models assume homogeneous material behavior, steady-state boundary loading, and consistent dimensional units. Always apply appropriate service factors, corrosion allowances, or load and resistance factor design (LRFD / ASD) safety margins required by your governing code.
Parameter Specifications & Worked Engineering Example
Baseline reference case using default design values for Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB)
Step-by-Step Benchmark Walkthrough
- Define Design Boundary Conditions: Establish the nominal operating parameters for the component or system:
Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = AISC 360-22 (Specification for Structural Steel Buildings). Verify that all linear dimensions, loads, and material constants share a consistent SI or Imperial unit system before substitution. - Execute Analytical Formulation: Substitute the normalized input vector into the governing relation (
Dimensional and geometric properties of European structural steel profiles: IPE beams, HEA/HEB wide-flange columns per EN 10034 / EN 10025.) in accordance with AISC 360-22 (Specification for Structural Steel Buildings), Eurocode 3 (EN 1993-1-1 & EN 1993-1-8), AWS D1.1 / ISO 5817 (Structural Welding Code), ASME B30. - Verify Computed Engineering Outputs: For the baseline design case, the calculator yields
Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready. Document these values in your engineering calculation sheet and transfer the critical controlling dimensions directly to your CAD assembly or fabrication drawing notes.
Frequently Asked Engineering Questions
Technical reference & verification guidelines for Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB)
What governing equation and methodology does the Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB) use?
The Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB) evaluates dimensional and geometric properties of european structural steel profiles: ipe beams, hea/heb wide-flange columns per en 10034 / en 10025 within the Structural Steel, Beam Mechanics & Welding Engineering domain using the governing formulation: Dimensional and geometric properties of European structural steel profiles: IPE beams, HEA/HEB wide-flange columns per EN 10034 / EN 10025.. All intermediate quantities are computed in double-precision floating-point arithmetic to prevent cumulative rounding drift before final design verification.
Which international engineering standards apply to Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB) calculations?
Calculations and boundary assumptions in this utility align with recognized industry references including AISC 360-22 (Specification for Structural Steel Buildings), Eurocode 3 (EN 1993-1-1 & EN 1993-1-8), AWS D1.1 / ISO 5817 (Structural Welding Code), ASME B30. When preparing formal calculation packages or P.E. stamp submittals, always verify local jurisdictional code amendments and project-specific safety factors.
How should I integrate results from the Eurocode DIN / EN Structural Steel Profiles Library (IPE, HEA, HEB) into my CAD or BIM workflow?
Confirm that member end-connection rotational stiffness (pinned, semi-rigid, or fixed moment connections) modeled in your structural BIM/CAD framing plan matches the effective length factor (K) assumed in calculation. Using the baseline benchmark (Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = AISC 360-22 (Specification for Structural Steel Buildings)), the solver yields Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready, which can be directly cross-referenced against your parametric 3D assembly constraints, 2D fabrication drawings, or bill of materials (BOM).