DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table
Standard 90° countersunk socket screw dimensions (M2 to M16): head diameter, head height, countersink hole diameter, and depth.
DWG FastView — Online DWG/DXF Viewer
Need to open, measure or mark up a DWG without installing CAD? DWG FastView runs in the browser. This is a sponsored placement and has no effect on the results of the tool above.
Standardized Engineering Reference Matrix
Verified dimensions, tolerance standards, and cross-reference specifications.
| Thread Size | Head Dia dk (max mm) | Head Height k (max mm) | Hex Socket s (mm) | Countersink Dia (mm) | 90° Sink Depth (mm) | Action |
|---|---|---|---|---|---|---|
| M3 | 6.00 | 1.70 | 2.0 | 6.6 | 1.9 | |
| M4 | 8.00 | 2.30 | 2.5 | 8.8 | 2.5 | |
| M5 | 10.00 | 2.80 | 3.0 | 10.8 | 3.0 | |
| M6 | 12.00 | 3.30 | 4.0 | 13.0 | 3.5 | |
| M8 | 16.00 | 4.40 | 5.0 | 17.2 | 4.6 | |
| M10 | 20.00 | 5.50 | 6.0 | 21.5 | 5.8 | |
| M12 | 24.00 | 6.50 | 8.0 | 25.5 | 6.8 | |
| M16 | 30.00 | 8.50 | 10.0 | 31.5 | 8.8 |
Recommended Engineering & CAD Utilities
Handpicked companion tools to streamline modeling, calculation, and drafting workflows
Standard Fasteners Specification Library
Searchable library of ISO, DIN, ANSI, and JIS fastener specifications: bolts, screws, nuts, washers, pins, and rivets.
Standard Fastener 2D Profile Generator
Generate 2D drawing profiles for bolts, screws, nuts, and washers per ISO/DIN/ANSI standards — export as DXF or SVG.
Welding Symbols Quick Reference Chart (AWS A2.4 & ISO 2553)
Interactive guide to AWS A2.4 and ISO 2553 welding symbols including fillet, groove, plug, slot, and surfacing welds with supplementary symbols.
openBIM IFC Schema Evolution Matrix (IFC2x3 vs IFC4 vs IFC4.3)
Comparison of buildingSMART IFC schemas: building vertical domains vs civil infrastructure (bridges, roads, railways) and Solibri compatibility.
Fastener Strength Grade & Property Class Reference Chart
Mechanical strength properties for ISO, ASTM, SAE, and DIN bolt grades: proof load, yield strength, tensile strength, and hardness.
Drawing Lag & Database Cleaner
Purge orphan regapps, unreferenced DGN linestyles, and block bloat causing viewport freezing.
Engineering Methodology & Design Standards: DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table
Discipline: Fastener Engineering & Bolted Joint Mechanics
Governing Mathematical Formulation
In professional Fastener Engineering & Bolted Joint Mechanics workflows, accurate sizing and performance verification require consistent unit normalization and adherence to closed-form analytical mechanics. This DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table utility implements the standardized engineering formulation:
Standard 90° countersunk socket screw dimensions (M2 to M16): head diameter, head height, countersink hole diameter, and depth.Standard 90° countersunk socket screw dimensions (M2 to M16): head diameter, head height, countersink hole diameter, and depth. Every input change triggers an instant client-side recalculation across all coupled dependent variables, enabling rapid sensitivity analysis during preliminary and detailed CAD design phases.
Applicable Codes, Standards & CAD Integration
Ensure clearance hole diameters conform to ISO 273 / ASME B18.2.8 medium fit series and verify minimum thread engagement length (typically 1.0×d in steel, 2.0×d in aluminum) in your assembly BOM.
Engineering Verification Note: Analytical models assume homogeneous material behavior, steady-state boundary loading, and consistent dimensional units. Always apply appropriate service factors, corrosion allowances, or load and resistance factor design (LRFD / ASD) safety margins required by your governing code.
Parameter Specifications & Worked Engineering Example
Baseline reference case using default design values for DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table
Step-by-Step Benchmark Walkthrough
- Define Design Boundary Conditions: Establish the nominal operating parameters for the component or system:
Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = VDI 2230 (Systematic Calculation of High Duty Bolted Joints). Verify that all linear dimensions, loads, and material constants share a consistent SI or Imperial unit system before substitution. - Execute Analytical Formulation: Substitute the normalized input vector into the governing relation (
Standard 90° countersunk socket screw dimensions (M2 to M16): head diameter, head height, countersink hole diameter, and depth.) in accordance with VDI 2230 (Systematic Calculation of High Duty Bolted Joints), ISO 898-1 (Mechanical Properties of Carbon & Alloy Steel Fasteners), ASME B1.1 / ISO 68-1. - Verify Computed Engineering Outputs: For the baseline design case, the calculator yields
Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready. Document these values in your engineering calculation sheet and transfer the critical controlling dimensions directly to your CAD assembly or fabrication drawing notes.
Frequently Asked Engineering Questions
Technical reference & verification guidelines for DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table
What governing equation and methodology does the DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table use?
The DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table evaluates standard 90° countersunk socket screw dimensions (m2 to m16): head diameter, head height, countersink hole diameter, and depth within the Fastener Engineering & Bolted Joint Mechanics domain using the governing formulation: Standard 90° countersunk socket screw dimensions (M2 to M16): head diameter, head height, countersink hole diameter, and depth.. All intermediate quantities are computed in double-precision floating-point arithmetic to prevent cumulative rounding drift before final design verification.
Which international engineering standards apply to DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table calculations?
Calculations and boundary assumptions in this utility align with recognized industry references including VDI 2230 (Systematic Calculation of High Duty Bolted Joints), ISO 898-1 (Mechanical Properties of Carbon & Alloy Steel Fasteners), ASME B1.1 / ISO 68-1. When preparing formal calculation packages or P.E. stamp submittals, always verify local jurisdictional code amendments and project-specific safety factors.
How should I integrate results from the DIN 7991 / ISO 10642 Countersunk Screw & Hole Specification Reference Table into my CAD or BIM workflow?
Ensure clearance hole diameters conform to ISO 273 / ASME B18.2.8 medium fit series and verify minimum thread engagement length (typically 1.0×d in steel, 2.0×d in aluminum) in your assembly BOM. Using the baseline benchmark (Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = VDI 2230 (Systematic Calculation of High Duty Bolted Joints)), the solver yields Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready, which can be directly cross-referenced against your parametric 3D assembly constraints, 2D fabrication drawings, or bill of materials (BOM).