Fanuc CNC G-Code Complete Reference Chart
Searchable reference of all Fanuc G-codes for milling and turning with syntax, parameters, and programming examples.
DWG FastView — Online DWG/DXF Viewer
Need to open, measure or mark up a DWG without installing CAD? DWG FastView runs in the browser. This is a sponsored placement and has no effect on the results of the tool above.
Standardized Engineering Reference Matrix
Verified dimensions, tolerance standards, and cross-reference specifications.
| Code | Function | Group | Command Syntax | Fanuc 0i / 31i Control Application | Action |
|---|---|---|---|---|---|
| G00 | Positioning (Rapid) | 01 | G00 X_ Y_ Z_ | Point-to-point rapid positioning with vector or non-linear interpolation. | |
| G01 | Linear Interpolation | 01 | G01 X_ Y_ Z_ F_ | Controlled linear cutting feed in units per minute (G94) or per rev (G95). | |
| G02 | Circular Arc CW | 01 | G02 X_ Y_ R_ F_ (or I_ J_) | Clockwise arc movement. | |
| G03 | Circular Arc CCW | 01 | G03 X_ Y_ R_ F_ (or I_ J_) | Counter-clockwise arc movement. | |
| G20 / G21 | Inch / Metric Selection | 06 | G20 or G21 | Input dimension unit: G20=inches, G21=millimeters. | |
| G43 / G44 | Tool Offset Direction | 08 | G43 H_ Z_ | G43 positive tool offset; G44 negative offset. | |
| G80 | Canned Cycle Cancel | 09 | G80 | Deactivates all modal drilling, tapping, and boring cycles. | |
| G84 | Rigid Tapping Cycle | 09 | G84 X_ Y_ Z_ R_ F_ | Synchronized spindle speed and feed for tapping threads. | |
| G90 / G91 | Absolute / Incremental | 03 | G90 or G91 | G90 coordinates referenced from origin; G91 from current tool position. |
Recommended Engineering & CAD Utilities
Handpicked companion tools to streamline modeling, calculation, and drafting workflows
CNC M-Code Quick Reference Table (Fanuc / Haas / Siemens)
Complete searchable reference of CNC M-codes for machine functions: spindle, coolant, tool changes, program control, and optional stops.
CNC Hole Drilling G-Code Cycle Generator (G81 / G83 / G73)
Generate parametric CNC drilling cycles: standard drill (G81), deep-hole peck drill (G83), and chip-break drill (G73) for Fanuc, Haas, and Siemens.
CNC Thread Milling Helical Interpolation (G02/G03) Generator
Calculate toolpaths and generate G-code for internal and external CNC thread milling with climb milling and arc lead-in/lead-out.
CNC 2D Profile Toolpath Generator
Generate CNC G-Code for 2D profile cutting from DXF geometry with lead-in/lead-out, cutter compensation, and multiple passes.
CNC Face Milling & Rectangular Pocket G-Code Generator
Generate 2.5D face milling and pocket clearing CNC toolpath routines with stepover, depth-of-cut passes, and feed rate optimization.
AutoCAD vs GstarCAD Shortcuts
Side-by-side comparison of command alias compatibility and migration differences.
Engineering Methodology & Design Standards: Fanuc CNC G-Code Complete Reference Chart
Discipline: HVAC, Psychrometrics & Building Thermal Systems
Governing Mathematical Formulation
In professional HVAC, Psychrometrics & Building Thermal Systems workflows, accurate sizing and performance verification require consistent unit normalization and adherence to closed-form analytical mechanics. This Fanuc CNC G-Code Complete Reference Chart utility implements the standardized engineering formulation:
Searchable reference of all Fanuc G-codes for milling and turning with syntax, parameters, and programming examples.Searchable reference of all Fanuc G-codes for milling and turning with syntax, parameters, and programming examples. Every input change triggers an instant client-side recalculation across all coupled dependent variables, enabling rapid sensitivity analysis during preliminary and detailed CAD design phases.
Applicable Codes, Standards & CAD Integration
Coordinate ductwork aspect ratios, acoustic lining thickness, and ceiling plenum clearances within your federated MEP BIM model to avoid field routing clashes and excessive static pressure drops.
Engineering Verification Note: Analytical models assume homogeneous material behavior, steady-state boundary loading, and consistent dimensional units. Always apply appropriate service factors, corrosion allowances, or load and resistance factor design (LRFD / ASD) safety margins required by your governing code.
Parameter Specifications & Worked Engineering Example
Baseline reference case using default design values for Fanuc CNC G-Code Complete Reference Chart
Step-by-Step Benchmark Walkthrough
- Define Design Boundary Conditions: Establish the nominal operating parameters for the component or system:
Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = ASHRAE Handbook — Fundamentals & HVAC Systems and Equipment. Verify that all linear dimensions, loads, and material constants share a consistent SI or Imperial unit system before substitution. - Execute Analytical Formulation: Substitute the normalized input vector into the governing relation (
Searchable reference of all Fanuc G-codes for milling and turning with syntax, parameters, and programming examples.) in accordance with ASHRAE Handbook — Fundamentals & HVAC Systems and Equipment, SMACNA HVAC Duct Construction Standards, ISO 6946, ASHRAE Standard 62.1 & 90.1. - Verify Computed Engineering Outputs: For the baseline design case, the calculator yields
Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready. Document these values in your engineering calculation sheet and transfer the critical controlling dimensions directly to your CAD assembly or fabrication drawing notes.
Frequently Asked Engineering Questions
Technical reference & verification guidelines for Fanuc CNC G-Code Complete Reference Chart
What governing equation and methodology does the Fanuc CNC G-Code Complete Reference Chart use?
The Fanuc CNC G-Code Complete Reference Chart evaluates searchable reference of all fanuc g-codes for milling and turning with syntax, parameters, and programming examples within the HVAC, Psychrometrics & Building Thermal Systems domain using the governing formulation: Searchable reference of all Fanuc G-codes for milling and turning with syntax, parameters, and programming examples.. All intermediate quantities are computed in double-precision floating-point arithmetic to prevent cumulative rounding drift before final design verification.
Which international engineering standards apply to Fanuc CNC G-Code Complete Reference Chart calculations?
Calculations and boundary assumptions in this utility align with recognized industry references including ASHRAE Handbook — Fundamentals & HVAC Systems and Equipment, SMACNA HVAC Duct Construction Standards, ISO 6946, ASHRAE Standard 62.1 & 90.1. When preparing formal calculation packages or P.E. stamp submittals, always verify local jurisdictional code amendments and project-specific safety factors.
How should I integrate results from the Fanuc CNC G-Code Complete Reference Chart into my CAD or BIM workflow?
Coordinate ductwork aspect ratios, acoustic lining thickness, and ceiling plenum clearances within your federated MEP BIM model to avoid field routing clashes and excessive static pressure drops. Using the baseline benchmark (Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = ASHRAE Handbook — Fundamentals & HVAC Systems and Equipment), the solver yields Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready, which can be directly cross-referenced against your parametric 3D assembly constraints, 2D fabrication drawings, or bill of materials (BOM).