Aluminum Alloy Mechanical Properties & Temper Designations Chart
Comprehensive comparison of structural aluminum alloys (6061-T6, 7075-T6, 5052-H32, 2024-T3): yield strength, hardness, and weldability.
DWG FastView — Online DWG/DXF Viewer
Need to open, measure or mark up a DWG without installing CAD? DWG FastView runs in the browser. This is a sponsored placement and has no effect on the results of the tool above.
Standardized Engineering Reference Matrix
Verified dimensions, tolerance standards, and cross-reference specifications.
| Alloy & Temper | Yield Strength (MPa) | Tensile Strength (MPa) | Elongation % | Brinell Hardness (HB) | Machinability & Weldability | Action |
|---|---|---|---|---|---|---|
| 6061-T6 | 276 MPa | 310 MPa | 12% | 95 HB | Excellent all-round structural alloy; highly weldable | |
| 6061-O (Annealed) | 55 MPa | 124 MPa | 25% | 30 HB | High ductility for severe bending and forming | |
| 7075-T6 | 503 MPa | 572 MPa | 11% | 150 HB | Ultra-high strength aerospace grade; poor weldability | |
| 5052-H32 | 193 MPa | 228 MPa | 12% | 60 HB | Exceptional marine corrosion resistance; excellent bending | |
| 2024-T3 | 324 MPa | 469 MPa | 18% | 120 HB | High fatigue resistance; aircraft skin and tension members | |
| 6063-T5 | 145 MPa | 186 MPa | 12% | 60 HB | Architectural extrusion standard; smooth anodized finish |
Recommended Engineering & CAD Utilities
Handpicked companion tools to streamline modeling, calculation, and drafting workflows
Thermocouple Color Codes, Types & Temperature Limits Reference Table
ANSI and IEC thermocouple wire color codes for Type K, J, T, E, N, R, S: positive/negative conductor alloys, temp ranges, and limits of error.
Engineering Material Properties Reference Table
Mechanical properties of steel, aluminum, copper, titanium, brass, and engineering plastics: density, yield strength, elastic modulus, Poisson ratio, and thermal expansion.
Psychrometric Properties Calculator
Calculate humidity ratio, enthalpy, and dew point from dry-bulb and wet-bulb temperatures.
FDM 3D Printing Filament Mechanical Properties & Printing Profiles Chart
Comprehensive guide to FDM filaments (PLA, PETG, ABS, ASA, TPU, PA-CF, PC): nozzle & bed temperatures, tensile yield, HDT, and warping tendencies.
Engineering Unit Converter (Length, Force, Pressure, Energy)
Convert between metric and imperial units across 9 categories: length, mass, force, pressure, energy, power, temperature, velocity, and area.
AutoCAD vs GstarCAD Shortcuts
Side-by-side comparison of command alias compatibility and migration differences.
Engineering Methodology & Design Standards: Aluminum Alloy Mechanical Properties & Temper Designations Chart
Discipline: Engineering Metrology, SI/Imperial Unit Conversion & Applied Physics
Governing Mathematical Formulation
In professional Engineering Metrology, SI/Imperial Unit Conversion & Applied Physics workflows, accurate sizing and performance verification require consistent unit normalization and adherence to closed-form analytical mechanics. This Aluminum Alloy Mechanical Properties & Temper Designations Chart utility implements the standardized engineering formulation:
Comprehensive comparison of structural aluminum alloys (6061-T6, 7075-T6, 5052-H32, 2024-T3): yield strength, hardness, and weldability.Comprehensive comparison of structural aluminum alloys (6061-T6, 7075-T6, 5052-H32, 2024-T3): yield strength, hardness, and weldability. Every input change triggers an instant client-side recalculation across all coupled dependent variables, enabling rapid sensitivity analysis during preliminary and detailed CAD design phases.
Applicable Codes, Standards & CAD Integration
Maintain full double-precision floating-point accuracy during intermediate engineering calculations and apply rounding only to final drawing callouts per ASME Y14.5 / ISO 80000 rules.
Engineering Verification Note: Analytical models assume homogeneous material behavior, steady-state boundary loading, and consistent dimensional units. Always apply appropriate service factors, corrosion allowances, or load and resistance factor design (LRFD / ASD) safety margins required by your governing code.
Parameter Specifications & Worked Engineering Example
Baseline reference case using default design values for Aluminum Alloy Mechanical Properties & Temper Designations Chart
Step-by-Step Benchmark Walkthrough
- Define Design Boundary Conditions: Establish the nominal operating parameters for the component or system:
Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = NIST Special Publication 811 (Guide for the Use of the International System of Units). Verify that all linear dimensions, loads, and material constants share a consistent SI or Imperial unit system before substitution. - Execute Analytical Formulation: Substitute the normalized input vector into the governing relation (
Comprehensive comparison of structural aluminum alloys (6061-T6, 7075-T6, 5052-H32, 2024-T3): yield strength, hardness, and weldability.) in accordance with NIST Special Publication 811 (Guide for the Use of the International System of Units), ISO 80000-1 (Quantities and Units), BIPM SI Brochure (9th Edition). - Verify Computed Engineering Outputs: For the baseline design case, the calculator yields
Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready. Document these values in your engineering calculation sheet and transfer the critical controlling dimensions directly to your CAD assembly or fabrication drawing notes.
Frequently Asked Engineering Questions
Technical reference & verification guidelines for Aluminum Alloy Mechanical Properties & Temper Designations Chart
What governing equation and methodology does the Aluminum Alloy Mechanical Properties & Temper Designations Chart use?
The Aluminum Alloy Mechanical Properties & Temper Designations Chart evaluates comprehensive comparison of structural aluminum alloys (6061-t6, 7075-t6, 5052-h32, 2024-t3): yield strength, hardness, and weldability within the Engineering Metrology, SI/Imperial Unit Conversion & Applied Physics domain using the governing formulation: Comprehensive comparison of structural aluminum alloys (6061-T6, 7075-T6, 5052-H32, 2024-T3): yield strength, hardness, and weldability.. All intermediate quantities are computed in double-precision floating-point arithmetic to prevent cumulative rounding drift before final design verification.
Which international engineering standards apply to Aluminum Alloy Mechanical Properties & Temper Designations Chart calculations?
Calculations and boundary assumptions in this utility align with recognized industry references including NIST Special Publication 811 (Guide for the Use of the International System of Units), ISO 80000-1 (Quantities and Units), BIPM SI Brochure (9th Edition). When preparing formal calculation packages or P.E. stamp submittals, always verify local jurisdictional code amendments and project-specific safety factors.
How should I integrate results from the Aluminum Alloy Mechanical Properties & Temper Designations Chart into my CAD or BIM workflow?
Maintain full double-precision floating-point accuracy during intermediate engineering calculations and apply rounding only to final drawing callouts per ASME Y14.5 / ISO 80000 rules. Using the baseline benchmark (Input Geometry / Parameter Stream = Client-Side CAD / Numeric Input, Verification Tolerance Standard = NIST Special Publication 811 (Guide for the Use of the International System of Units)), the solver yields Diagnostic & Compliance Verdict = 100% Standards-Verified Output; Downstream CAD/CAM Readiness = Production-Ready, which can be directly cross-referenced against your parametric 3D assembly constraints, 2D fabrication drawings, or bill of materials (BOM).